DIFF

[demon]

Can you use the HR diff housing and bolt it to the fe ute springs using the hr 4 bolt plate or do i have use the u bolts Thanking you Demon

[Digger]

Hi Demon,

You can mount the housing either way but  if you are going to lower the car using lowering blocks you will need to use the U bolts.

Hope this helps
Steve

[FC-V8]

Hi Demon
         The HR housing will fit with its original 4 bolt plates but a couple of things to remember are the HR diff has different uni joint,& the the flexable line for the brakes is a different thread but you can get a adaptor,& the hand brake cable is also different, (i used the HR one)
If you are going to run a HR disc front end make sure your HR diff has 9/16 wheel cylinders as they are different to the drum brake front.