|
Title: DIFF Post by: demon on April 26, 2002, 08:36:37 AM Can you use the HR diff housing and bolt it to the fe ute springs using the hr 4 bolt plate or do i have use the u bolts Thanking you Demon
Title: Re: DIFF Post by: Digger on April 26, 2002, 10:50:31 AM Hi Demon,
You can mount the housing either way but if you are going to lower the car using lowering blocks you will need to use the U bolts. Hope this helps Steve Title: Re: DIFF Post by: FC-V8 on April 26, 2002, 07:05:05 PM Hi Demon
The HR housing will fit with its original 4 bolt plates but a couple of things to remember are the HR diff has different uni joint,& the the flexable line for the brakes is a different thread but you can get a adaptor,& the hand brake cable is also different, (i used the HR one) If you are going to run a HR disc front end make sure your HR diff has 9/16 wheel cylinders as they are different to the drum brake front. |