News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

1/4 vent glass

Started by joezan, February 18, 2018, 09:04:08 AM

Previous topic - Next topic

joezan

I want to replace the front 1/4 vent glass how is the old glass removed then replaced ... Thanks

ardiesse

You want to take the glass out from the frame?
(Richard will post in about five minutes with a Game of Thrones reference)

Remove the quarter window assembly from the door, and remove the old seal, because it will go all oozy when you do this -
preheat the oven to 160 C, put the quarter window in the oven for half an hour or so.
Clamp the glass in a vice between a couple of pieces of softwood, and wearing leather gloves, gently ease the frame off the glass.

Rob
Remember: if your Holden's not leaking oil, it doesn't have any.

joezan

Thanks rob yes that’s what I want to do was thinking of using a heat gun never thought of the oven