News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Hubcaps

Started by FCrob, August 16, 2012, 04:20:16 PM

Previous topic - Next topic

FCrob

Guys, going through some boxes of parts and found a few hubcaps. Some are the normal steel chrome type but there are three that appear to be aluminium.
My question is where the aluminum ones manufactured for any particular model  fe fc special or standard models or is it a case of the aluminium was more expensive so they remade in steel to reduce costs?

Rob

zulu


G'day Rob,

If they have the Lion in the triangle on them they would be stainless steel

they dent easier than the steel ones but arn't as prone to rust

I have a set of 4 NOS Alluminium caps here with no Lion, these I'm told were made for caravans

Gary

RET

FE hubcaps are stainless steel, FC ones are chrome steel. As Gary said, the stainless ones tend to be more easily dented, but they last forever.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

FCrob

Thanks guys
Can always rely on the forum for accurate fast response.
I'll put them back in the box someone might need a hubcap one day.
Rob

TTV6FC

I have seen these aluminium ones on caravans also,look very similar to FB but no lion as mentioned.
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!