News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Original Bosch Headlights/Halogen conversion

Started by TTV6FC, June 08, 2012, 11:41:28 PM

Previous topic - Next topic

TTV6FC

Hi all.Has anyone done a conversion from standard globes to Halogen globes but maintained the original Bosch headlight fitting and just changed the globe?I am installing the headlights on BlackFC and noticed that an aftermarket Halogen H4 globe fits (basically) straight into the reflector and with a small addition to the original globe clip makes for a simple conversion.The wiring appears to be roughly 1mm which should handle the 4.6A on high beam and the reflector is steel so I can't really see any other problems.Would be ideal to have a relay installed as it is probably stretching the capabilities of the headlight switch and associated wiring.Any advice welcome.Cheers,Jamie.
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!

Stewy

Hi Jamie.
Have not done the H4 conversion. The standard Bosch headlight globes are 45-40 Watt.
I put in Halogen Headlight Bulbs 12volt 60/55 Watt with the Ba 20d Base from classicandvintagebulbs.comclassicandvintagebulbs.com with no problems.
Or I know where you can still get original bosch bulbs from.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

TTV6FC

Thanks Stewy,sounds like the go and in SA!What a surprise...Got plenty of original globes new in packets still.Cheers,Jamie.
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!

GMB-58FC

Jamie did you end up going with the Halogens?

I was looking at my lights today and toying with the idea of halogens or something else (complete rewire) but retaining the outer shell of my old globes.
ABS Hobart- 6231 5855

FOR ALL YOUR BRAKE & CLUTCH NEEDS. 

PM FOR QUOTE

TTV6FC

Hey Ben,I will but haven't yet.I'll let you know how I go.Sounds like it should be as simple as putting in the Halogen globes.Jamie.
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!

GMB-58FC

Quote from: TTV6FC on August 18, 2012, 07:28:11 PM
Hey Ben,I will but haven't yet.I'll let you know how I go.Sounds like it should be as simple as putting in the Halogen globes.Jamie.


Great if you can keep me posted, I'm interested to see how much of a difference they make.

I'm toying with the idea of retro fitting a HID kit into mine.
ABS Hobart- 6231 5855

FOR ALL YOUR BRAKE & CLUTCH NEEDS. 

PM FOR QUOTE

Stewy

Hi Ben,
I put those halogen globes in and they certainly did make a difference,
I think that they are as good as a 70's sealed beam.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

GMB-58FC

Quote from: Stewy on August 18, 2012, 09:27:04 PM
Hi Ben,
I put those halogen globes in and they certainly did make a difference,
I think that they are as good as a 70's sealed beam.

Cheers Stewy   8)

Thanks for the info Stewy

I might grab a set closer to when I'll need them and see what they're like, If I'm not happy I see about fitting a set of HID's instead.
ABS Hobart- 6231 5855

FOR ALL YOUR BRAKE & CLUTCH NEEDS. 

PM FOR QUOTE

mcl1959

I would recommend the relays - I think the switch will break down eventually - wiring should be OK though as you suggest.

Ken

GMB-58FC

Are these [ebay]120960335846[/ebay] similar to what you guys are running?
ABS Hobart- 6231 5855

FOR ALL YOUR BRAKE & CLUTCH NEEDS. 

PM FOR QUOTE

Stewy

Hi Ben,
The globes  [quoteI put in Halogen Headlight Bulbs 12volt 60/55 Watt with the Ba 20d Base from classicandvintagebulbs.comhttp://classicandvintagebulbs.com with no problems.][/quote]
These globes have the correct Bosch base and just plug into your existing globe holder base simple as.
Those ones on ebay have a different connector and you would need to change your bulb holder or wiring.

Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery

GMB-58FC

Quote from: Stewy on August 19, 2012, 09:13:35 PM
Hi Ben,
The globes 
QuoteI put in Halogen Headlight Bulbs 12volt 60/55 Watt with the Ba 20d Base from classicandvintagebulbs.comhttp://classicandvintagebulbs.com with no problems.]
These globes have the correct Bosch base and just plug into your existing globe holder base simple as.
Those ones on ebay have a different connector and you would need to change your bulb holder or wiring.

Cheers Stewy   8)

Thanks for the heads up Stewy

I'll reassess later on down the track when I'm rewiring the car and go from there but I'll more than likely retro fit a HID kit in.
ABS Hobart- 6231 5855

FOR ALL YOUR BRAKE & CLUTCH NEEDS. 

PM FOR QUOTE

OldGMHolden

Quote from: Stewy on August 18, 2012, 09:27:04 PM
Hi Ben,
I put those halogen globes in and they certainly did make a difference,
I think that they are as good as a 70's sealed beam.

Cheers Stewy   8)

Hi Stewy,
If the Halogens are only as good as a sealed beam you've got problems.

They should run rings around an old 70's sealed beam, even more so with a couple of relays straight from the battery.

Cheers,
Gaz

waynos

#13
ken
my brother is always tellin me to run relays (hes a bike mechanic)
he said the switch will get too much current
(i have halogens obviously)
dads said they never had any back in the day
it all makes sense now
you confirm this
just been too lazy
always wondered why the dash lights freak out when adjusted
im on my second switch
thought the first one was just old
puttin in relays now when i can find where to hide them
The grinder is mightier than the sword.

Stewy

Hi Gaz,
Has been a long time since my LJ torana, and maybe I thought they were brighter than what they really were.
I just went and compared the lights with my VE and they are quite bright.
Might have to think about a relay because it sounds like they could shorten the lifespan of the headlight switch
Thanks to the forum for the heads up on that.






Cheers Stewy   8)
No matter how much you push the envelope, It'll still be stationery