FC Metal Fuse Holder

[Maco]

I am after 2 FC Metal Fuse Holders, NOS or good second hand.

As I had a blown fuse & when dismantling the plastic insulator on the end broke up in to pieces.

Thanks for any help.

Cheers
John

[zulu]

John

These have been reproduced, not sure if available
Separately
Try Vintage Wiring Harness

Gary

[ardiesse]

John,

Bakelite insulator with a brass eyelet, and the eyelet has the wire soldered into it?
You're a dab hand with a lathe - machine one up out of Teflon.

I'll raid the store at work.  It's amazing what's left over from the 1960s there.

Rob

[Errol62]

Vintage wiring are in lock down. Don’t ask how I know.............


Sent from my iPad using Tapatalk

[mcl1959]

These are the best I can come up with




The rubber protector ends are hard to find in good order, but all inside is still good.

Ken

[Maco]

PM sent Ken.

[mcl1959]

John, started thinking, are you wanting the internals of the fuse or the heat shrink bits on the outside, two of mine shown have the heat shrink but it is very hard and would break easily.
Ken

[FC427]

I am after 2 FC Metal Fuse Holders, NOS or good second hand.

As I had a blown fuse & when dismantling the plastic insulator on the end broke up in to pieces.

Thanks for any help.

Cheers
John

John have a few metal fuse holders you can have Mark

[Maco]

Hi Mark, all good thank you, I managed to get some.

Cheers
John