Title: FC Metal Fuse Holder Post by: Maco on August 29, 2020, 08:44:46 AM I am after 2 FC Metal Fuse Holders, NOS or good second hand.
As I had a blown fuse & when dismantling the plastic insulator on the end broke up in to pieces. Thanks for any help. Cheers John Title: Re: FC Metal Fuse Holder Post by: zulu on August 29, 2020, 09:48:18 AM John
These have been reproduced, not sure if available Separately Try Vintage Wiring Harness Gary Title: Re: FC Metal Fuse Holder Post by: ardiesse on August 29, 2020, 07:02:49 PM John,
Bakelite insulator with a brass eyelet, and the eyelet has the wire soldered into it? You're a dab hand with a lathe - machine one up out of Teflon. I'll raid the store at work. It's amazing what's left over from the 1960s there. Rob Title: Re: FC Metal Fuse Holder Post by: Errol62 on August 29, 2020, 07:39:17 PM Vintage wiring are in lock down. Don’t ask how I know.............
Sent from my iPad using Tapatalk Title: Re: FC Metal Fuse Holder Post by: mcl1959 on August 30, 2020, 10:34:39 AM These are the best I can come up with
(https://i.postimg.cc/PvrQsFF0/4024-EA18-B43-A-4-E7-B-B559-C70-AA2007631.jpg) ($2) The rubber protector ends are hard to find in good order, but all inside is still good. Ken Title: Re: FC Metal Fuse Holder Post by: Maco on August 30, 2020, 07:59:35 PM PM sent Ken. Title: Re: FC Metal Fuse Holder Post by: mcl1959 on September 01, 2020, 09:47:49 AM John, started thinking, are you wanting the internals of the fuse or the heat shrink bits on the outside, two of mine shown have the heat shrink but it is very hard and would break easily.
Ken Title: Re: FC Metal Fuse Holder Post by: FC427 on September 08, 2020, 10:38:50 PM I am after 2 FC Metal Fuse Holders, NOS or good second hand. John have a few metal fuse holders you can have Mark As I had a blown fuse & when dismantling the plastic insulator on the end broke up in to pieces. Thanks for any help. Cheers John Title: Re: FC Metal Fuse Holder Post by: Maco on September 09, 2020, 09:06:14 PM Hi Mark, all good thank you, I managed to get some.
Cheers John |