News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fillguard Wanted

Started by craiga, February 27, 2003, 10:22:55 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

craiga

February 27, 2003, 10:22:55 PM Last Edit: February 27, 2003, 10:24:31 PM by craiga
Does anyone have a "Filguard" they are interested in selling?

This was an original accessory that fits around the fuel inlet to prevent fuel spilling on to the paintwork.

Details are here
http://www.fefcholden.org.au/techinfo/nasco/trimstyle/filguard.html

Alternately does anyone know of another type that would fit?

Thanks in advance.

Craig.

graham_fuller

#1
February 28, 2003, 01:46:45 AM
Craig,
Make that 2 if anyone has some.I thought someone in Qld had repro'ed them as they were advertised in a club mag once I'm sure.
Cheers,
Graham

zulu

#2
February 28, 2003, 03:05:49 AM
Hi Craig, Go to a large plumbing suppliers (not hardware) with the outside diameter. You used to be able to get a stainless steel doover that closely resembles the original (take picture or sketch) the only catch is that the inside diameter will probably be too small & have to be cut to suit. I have an original if you want to borrow it to show to the suppliers.
Regards Gary

air-chief

#3
February 28, 2003, 09:46:27 AM
Hey Craig

Try "Cauchi's Auto accessories - Repro wheel spats & other stuff... call Nick on 0412-544-651"

I got it for another site, from memory hes the guy who also makes repo scratch plates.  Could be wrong thou, to many years of killing the ol memory with beer!

Cheers a-c

craiga

#4
February 28, 2003, 08:38:19 PM
Thanks a-c.

I'll give this guy a try and let everyone know.

Craig.

graham_fuller

#5
February 28, 2003, 09:46:11 PM
Tried this guy he only makes Spats.
Cheers,
Graham

air-chief

#6
March 01, 2003, 03:57:37 AM
Hey Guys

The one i'm thinking of is based in Shepparton Vic. Hes a member of the FB/EK club and makes a fair bit of repo stuff.  

Could be the same guy who makes the mudflap brackets.

Try him "Sam  03 5822 1379"

Cheers a-c

graham_fuller

#7
March 01, 2003, 04:14:17 AM
This guy has them $25ea + postage.They are Stainless Steel.He needs to know how far the neck sticks out past the rubber as there are 2 sizes.Thanks AC.
cheers,
Graham ;)

air-chief

#8
March 01, 2003, 06:03:51 AM
Hey Guys

I've seen one of these repo's and they look good.
Thanks for posting the price on the site Graham.

Cheers

Effie C

#9
March 30, 2003, 06:57:49 AM
Craig
Did you ever get one of these?
If sowhat was the quality and fit like?
Cost?
Thanks
John M
LIVE LIFE ONE DAY AT A TIME,FOR TOMORROW MAY NEVER COME!

Photo Site:http://img53.photobucket.com/albums/v161/EffieC/

craiga

#10
March 30, 2003, 07:03:45 AM
Hi John,

No, I haven't done anything about it yet, been too busy with other stuff.

Graham might have got one by now, see if he can help.

Cheers,

Craig.

graham_fuller

#11
March 31, 2003, 08:55:18 PM
Hi Guys,
Got them Saturday one for Craig and myself.Looks Great on the car.Top job.
Cheers,
Graham ;)
Print
Go Up Pages1
User actions