FC Van upright pillars (stiffeners)

[Brad]

Looking for THREE of the upright pillars (stiffeners) that are on the inside of the van .They stop the side of the van from wobbling around. Of the six that are on the van I am after the three on the passengers side.
   One of the side cuts that I bought to remove the windows from my van has the three missing .
     I am in Brisbane but willing to pay postage from anywhere.
      Any help would be much appreciated.
      Thanks.
          Brad.

[FATBOY]

just measure them up and go to a sheet metal workshop and get them to fold you some up

cheers fatboy

[Brad]

Exactly what I thought when I saw they weren't there before I bought the sides. But when I unpicked the right hand side to take down as a template I realised that the folded edge is curved. So it's not as straight forward as I thought.( no pun intended).
        Thanks anyway fatboy.
           Brad

[Brad]

Just a quick note to boost this  post
      I am still after the pillars , so If anyone knows of a wreck or anything to help me I would very much appreciate the info. Willing to pay a fair price for parts also freight . I am in Brisbane.
                  Thanks Brad

[nicko]

just an idea, but might work,
get the uprights folded with longer sides and trim the sides down to your curve and weld the flat bottom to curved sides and then install.
will save a lot of waiting for original ones to turn up
cheers Nick

[Brad]

Boost
      Still looking.
                    Thanks Brad

[spanner]

When I done the sides on my van, I had these sections pressed. I didn't worry about the slight curve. I just  put a bead of sicaflex down the inside and pushed it into position and welded them in. Can't really notice the gap.

You could get the metal worker to roll a slight curve in them after he presses them if you wanted.
Graham