Hey there Coolaride,
To the best of my knowledge the Detroit was made by Tilli's. I recall Ken McLean had a folder depicting every trim kit for every Holden up to HZ that he showed me once. What he doesn't know about them is not worth knowing.
What I can point you to are a couple of pix:
Siggy's FE has the Detroit kit:
Dan Power's FE has a Victoria kit:
There is also another variant of the Victoria called the Victoria Twinline, which has a second thinner strip butted up below the lower one shown on Dan's car, that runs down to the end of the rear door and then continues along the same line onto the quarter for maybe 4 inches. I've got one of these to go one my car when it gets rebuilt.
Just a few more spots for water to get in
cheers
RET
PS - on the Twinline kit the bonnet is the same colour as the front guards, unlike Dan's car above. There is a small piece of trim that runs from the front flipper window down to the start of the extra trim (maybe three inches), that breaks up the colour there. Something like a late 59 FC, below the window-line anyway.
