FE-FC Holden Discussion Forum
November 28, 2024, 06:00:24 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: blown red 186  (Read 4260 times)
Ben Auchter
Guest
« on: March 24, 2004, 01:00:11 AM »
0

Hi.I am writting in regards to the right combination(cam,head,carby,etc.)for a 186 that i am building.I have a blower off a Toyota 4 cylinder jap import (the same set up that 'Castlemain rod shop' have put together for the holden six cylinder) and i am not sure on the right cam and head mods that are needed to get max output from the blower i have. Any imformation i get will be much apreciated.I have seen this same set up on FC's and other early holdens in various performance magazines and thought someone could shed some light on the matter or someone that has tried this set up before, may know a bit about it. thank you.
Logged
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #1 on: March 24, 2004, 01:24:09 AM »
0

Sounds good already, Red 6 + Blower  Grin

Contact Waggot Engineering with regards to the cam, tell 'em what you are doing with the motor, and be honest, they have been making cams for Holden 6's since Adam was a boy.

You shouldn't have to go to crazy with the head, as the air is being "pushed" in rather than sucked in. You will need to be careful about your comp ratio and what fuel you intend to use.
Logged

blown red
Guest
« Reply #2 on: March 24, 2004, 11:51:15 PM »
0

thanks stinky for your imput.

Its still in its early stages so im sure i will be calling on you guys for more info down the track on various other tech advice.

IT will be going into a HR (but huge fan of the FC's and FE's) that i have just had fully sandblasted inside and out.

I have fully blasted 2 HR's so if any one is interested in one blasted and  zinc coated give us a hoy.
Logged
Ed
Guru
*****
Offline Offline

Model: FE
Posts: 3311



Ed74mnd
View Profile
« Reply #3 on: March 25, 2004, 12:49:01 AM »
0

where r u?

wouldnt have any good guards would u?

Cheers

Ed
Logged

in the shed
blown red
Guest
« Reply #4 on: March 26, 2004, 11:30:18 PM »
0


Ed. Im in the Hunter Valley, Singleton, NSW.

I have a couple of guards but only in fair condition.

Miles of windows, quarter windows, chrome strips,etc.

Logged
Oz_man
Junior Member
**
Offline Offline

Posts: 32



View Profile
« Reply #5 on: April 14, 2004, 05:26:18 AM »
0


is a blower just a turbo or what??
Logged
Effie C
Senior Member
****
Offline Offline

Model: other Holden
Posts: 822


Still Lost & Confused


View Profile WWW
« Reply #6 on: April 14, 2004, 05:37:44 AM »
0

A blower is a supercharger, a mechanically driven item.
A turbo is driven by the exhaust gas.
John M
Logged

LIVE LIFE ONE DAY AT A TIME,FOR TOMORROW MAY NEVER COME!

Photo Site:http://img53.photobucket.com/albums/v161/EffieC/
Oz_man
Junior Member
**
Offline Offline

Posts: 32



View Profile
« Reply #7 on: April 14, 2004, 05:46:45 AM »
0


ahh..

ok sweet.  thanks for clearing that up.
Logged
jaunt
Junior Member
**
Offline Offline

Posts: 28


onetonner


View Profile
« Reply #8 on: July 19, 2004, 07:43:26 AM »
0

Hi Ben, I saw an article in the latest Zoom magazine on a Blown 202, it gives all the details except cam. It `s mag no 79.  They say it punches out 367 Kw`s. Great  ;)numbers for a red motor. Wink
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.048 seconds with 20 queries.