FE-FC Holden Discussion Forum
November 28, 2024, 02:59:36 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Torana Brake questions  (Read 2509 times)
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« on: January 28, 2016, 01:19:41 PM »
0

When I first built my FE, due to readily available parts (on my shelf) I fitted an LC Booster, Master Cylinder, Distribution block/Warning Light and front discs with HR rear (disc type) drums.
I have since fitted LH front discs and calipers, it was all good up until recently when the brake warning light came on. I checked the wire connected to the Dist block, checked brake fluid levels (no change), there has been no dropped brake fluid or any apparent leaks. Braking has been normal apart from a slight squeal at low speed, I have not tried an emergency stop though.
Any ideas?
Logged

FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #1 on: January 28, 2016, 01:23:38 PM »
0

Sounds like a dodgy switch or earth.
Logged

87 velo
nsw-club
Junior Member
**
Offline Offline

Model: FE
Posts: 74


Sydney


View Profile
« Reply #2 on: January 28, 2016, 06:41:25 PM »
0

If you disconnect the wire from the switch does the light go out, if not the wire is shorted to ground some where.  If it does go out, try un screwing the switch and then re install it some types can be reset that way.
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #3 on: January 28, 2016, 08:31:53 PM »
0

Often the distribution block needs a rebuild as the internals get stuck

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 21 queries.