FE-FC Holden Discussion Forum
November 24, 2024, 07:59:51 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Restoration Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Wilsonia Gauge
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Wilsonia Gauge  (Read 4755 times)
Old_Mt_Isa_Boy
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 953


My Ute


View Profile
« on: January 02, 2014, 02:01:41 PM »
0
Is the Wilsonia gauge prone to an oil leak? I have checked and re-checked the fittings on the back but it still wants to leak. Anyone else had the problem?

Thanks in advance.

Regards

Wayne b
Logged
fcwrangler
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 1258


JIM-- Gilead NSW


Jim Tuckwell
View Profile
« Reply #1 on: January 02, 2014, 03:24:05 PM »
0
Wayne, have you checked the rose at the end of the tube? It could be pulled down crooked thus cutting into the tube. Failing that, maybe put some thread seal tape around the fitting and then screw it back together.
Jim
Logged
on the seventh day: God Made Holden
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #2 on: January 02, 2014, 05:02:14 PM »
0
Note that a Wilsonia does not have a taper fitting so you cannot use a typical compression fitting as on modern oil guages. It has a flat face fitting which is peculiar to older Smiths type guages. Without the correct fitting it will most likely leak.
If you have the correct fitting, is there a thin fibre gasket between the faces?  There should be.

Ken
Logged
Old_Mt_Isa_Boy
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 953


My Ute


View Profile
« Reply #3 on: January 02, 2014, 05:16:05 PM »
0
Wrong fitting. Not cool. I guess not a hope in hell getting one?

Regards

Wayne b
Logged
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #4 on: January 02, 2014, 05:25:59 PM »
0
buy a autometer plastic line kit... bugger the old copper line.

they also do copper
http://www.ebay.com/bhp/oil-pressure-gauge-line

pete
Logged
http://www.mallaby.com.au
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #5 on: January 02, 2014, 05:32:21 PM »
0
All you need is an adaptor. look on ebay or any instrument shop will be able to make it work.

Ken
Logged
Old_Mt_Isa_Boy
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 953


My Ute


View Profile
« Reply #6 on: January 02, 2014, 07:00:11 PM »
0
Agree Pete should have gone plastic.

Ken can you let me know the fitting adaptor size, or is it a common expression at a hydraulic shop?

Regards

Wayne b
Logged
hsv-001
Senior Member
****
Offline Offline

Posts: 909


View Profile
« Reply #7 on: January 02, 2014, 08:51:09 PM »
0
Wayne ,Lionel Otto instruments at 124 Evans road Salisbury when you come over this side of town . Cheers Haydn
Logged
Old_Mt_Isa_Boy
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 953


My Ute


View Profile
« Reply #8 on: January 02, 2014, 10:53:17 PM »
0
Thanks Haydn.

Regards

Wayne
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.031 seconds with 19 queries.