FE-FC Holden Discussion Forum
November 24, 2024, 08:05:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Modification Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > red six conversion
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: red six conversion  (Read 4702 times)
MRJ68
Junior Member
**
Offline Offline

Model: FE
Posts: 35


pie


View Profile
« on: July 24, 2013, 08:07:58 PM »
0
when putting red , blue, black 6 in with 4 speed do you need to put the bigger hump in or does that stay
Logged
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #1 on: July 24, 2013, 08:23:11 PM »
0
In my experience with an Aussie 4 speed, there is not enough room for the linkages.
Logged
http://forum.fefcholden.club/index.php/topic,18001.0.html
fe350chev
Guru
*****
Offline Offline

Model: FE and FC
Posts: 2601



View Profile
« Reply #2 on: July 24, 2013, 09:04:26 PM »
0
But not the massive one i dont think (ek auto) but i could be wrong.
Logged
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck
fe350chev
Guru
*****
Offline Offline

Model: FE and FC
Posts: 2601



View Profile
« Reply #3 on: July 24, 2013, 09:15:03 PM »
0
This article might help, see bottom line.

http://www.earlyholdenparts.com.au/fc-holden/all-synchro-column-kit/
Logged
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck
fe350chev
Guru
*****
Offline Offline

Model: FE and FC
Posts: 2601



View Profile
« Reply #4 on: July 24, 2013, 09:28:54 PM »
0
Sorry, should explain what I mean, since I think from memory 3 speed all synchro and 4 speed u want to use have same housings I am assuming the tunnel in the last line would be ok but I am not sure if the snout at the back will clear, should but have not done it on a fc.
Logged
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck
MRJ68
Junior Member
**
Offline Offline

Model: FE
Posts: 35


pie


View Profile
« Reply #5 on: July 24, 2013, 10:08:37 PM »
0
thank u all for your help , fe350chev the link was good thanks
Logged
MRJ68
Junior Member
**
Offline Offline

Model: FE
Posts: 35


pie


View Profile
« Reply #6 on: July 24, 2013, 10:14:37 PM »
0
didn't ask but with a conversion to the column do u need for it to be collapsible
Logged
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #7 on: July 25, 2013, 06:07:24 AM »
0
If its a 202 yes you need one.
If its 186 and less no you dont.



Pete
Logged
http://www.mallaby.com.au
hsv-001
Senior Member
****
Offline Offline

Posts: 909


View Profile
« Reply #8 on: July 25, 2013, 10:00:06 AM »
0
Now i'm confused. Are you moving or modifying the radiator or position to fit the red blue black motor, if not the motor is very close to the firewall and the bellhousing is cramped up against the hump near the clutch pedal side where the linkages need clearance. When welding in a new tunnel this is always a tight corner and I usually reposition the dimmer switch .
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.03 seconds with 21 queries.