FE-FC Holden Discussion Forum
November 01, 2024, 03:36:43 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Grey motor wiring  (Read 2225 times)
Gordon
nsw-club
Full Member
***
Offline Offline

Model: FC
Posts: 153



View Profile
« on: January 27, 2013, 05:07:04 PM »
0

Hi i have a grey motor on a solid stand and want to start it, but not sure how to wire it up ,what connects to what ,two coil wires, two wires of alt, dis wire etc any ideas
Thanks Gordon
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: January 27, 2013, 05:19:33 PM »
+1

If you have a spare ignition switch then mount this on the frame somewhere. Run heavy positive battery wire to the starter and heavy negative to a solid earth on the motor (eg generator mounting block).
Run a wire from battery to the bat terminal on the switch.
Run a wire from positive side of coil to ign terminal on the switch.
Run a wire from the small starter screw to the sol terminal on the switch.
The black wire should still be in place from the negative side of the coil to the distributor.
Don't worry about wiring up the generator.
Turning the ignition to start should now fire it up

Ken
Logged
Gordon
nsw-club
Full Member
***
Offline Offline

Model: FC
Posts: 153



View Profile
« Reply #2 on: January 27, 2013, 05:23:59 PM »
0

Thanks Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.028 seconds with 19 queries.