FE-FC Holden Discussion Forum
November 25, 2024, 05:26:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: HOT STARTING  (Read 3640 times)
graham_fuller
nsw-club
Guru
*****
Offline Offline

Model: FE
Posts: 1979


I love YaBB 1 Gold!


View Profile
« on: January 21, 2013, 07:24:39 PM »
0

Guys when my car is hot it turns over as if the battery is flat and bearly starts. It reads 18volts at the terminals when not under load and cranks reasonably when cold. Do I assume the battery is the problem?
Cheers,
Graham
Logged
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #1 on: January 21, 2013, 07:49:10 PM »
0

Starter motor is full of carbon and needs servicing ..

full strip down and clean up is in order..

Brushes will def need to be replaced as well as this could be the problem as well..


Pete
Logged

Maco
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 964



View Profile
« Reply #2 on: January 21, 2013, 09:13:46 PM »
0

Hi Graham,

Check for any loose connections & also as Pete did mention.

Cheers
John
Logged

Better in Green
87 velo
nsw-club
Junior Member
**
Offline Offline

Model: FE
Posts: 74


Sydney


View Profile
« Reply #3 on: January 21, 2013, 11:15:01 PM »
0

Do a voltage drop test, as under bonnet temperatures increase so does resistance. Get a multimeter select volts put one end on battery pos the other on starter solenoid pos, before cranking meter will show nearly battery volts, get someone to crank and look at the meter about 1 volt is acceptable, the higher the voltage-the greater the resistance. Do the same same with the earth cable, from neg terminal to engine and get some one to crank, should be about the same as the positive side.

You also said the voltage at the battery was 18 volts? Sounds a bit odd, 14 ish after shutting the engine down is OK, is your meter OK, or perhaps your charging system is cooking the battery
Logged
colt
act-club
Senior Member
****
Offline Offline

Posts: 869


I love YaBB 1G - SP1!


View Profile
« Reply #4 on: January 22, 2013, 04:33:04 PM »
0

Graham, as Velo said, you may be over charging the battery. if you've got 18 volts you may not have any current. I would probably look at your regulator.

Colin.
Logged

colt
graham_fuller
nsw-club
Guru
*****
Offline Offline

Model: FE
Posts: 1979


I love YaBB 1 Gold!


View Profile
« Reply #5 on: January 24, 2013, 05:28:08 PM »
0

Hi All,
Just wanted to thank everyone for their input. Turns out the Regulator was a little low on output to the battery, and the battery was under charging. Local Auto Electrian sorted for me today.
Cheers,
Graham
Logged
Maco
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 964



View Profile
« Reply #6 on: January 24, 2013, 07:44:24 PM »
0

Great news, see you on Saturday.

Cheers
John
Logged

Better in Green
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.036 seconds with 20 queries.