FE-FC Holden Discussion Forum
July 06, 2024, 08:01:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Restoration Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Rear springs bolt
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Rear springs bolt  (Read 2438 times)
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 947


Aussie adventure


View Profile
« on: May 29, 2010, 02:06:44 PM »
0
Hi All
Is the nut and bolt that goes through the middle of the leaf springs available from rares???
I got one off and the bolt is pretty well worn and the other the nut is just turning on the bolt Tongue
I picked up a new set of leaf spring inserts the other day but didn't see any bolt Huh
Thanks Nick
Logged
You can never have too many!
Port Macquarie NSW
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #1 on: May 29, 2010, 02:38:50 PM »
0
Yep they are available  its turning as there is like a big screwdriver slot on the inside easiest way if you are replacing is cut the nut off and hit it through with a pin punch.
https://www.americanautos.com.au/secure.html
Logged
http://www.mallaby.com.au
FC427
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 2457


I love YaBB 1G - SP1!


View Profile
« Reply #2 on: May 29, 2010, 11:13:47 PM »
0
Are you talking about the center bolts the ones that hold the spring pack together  Huh if so I get them from my trailer shop .......FC427......
Logged
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #3 on: May 30, 2010, 08:43:31 AM »
0
Yeah now i  have read it again id say thats the one they are after. Undecided
Logged
http://www.mallaby.com.au
Not Happy Jan
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 947


Aussie adventure


View Profile
« Reply #4 on: June 03, 2010, 03:35:06 PM »
0
Thanks Boys.
Yes that's right ...I'm after the one that goes through the centre of the leafsprings.
the bolt sits proud of the top of the spring and sits in the hole in the middle of the rubbers for the spring pads and the nut end  fits into the other spring pad??
I'll try my local trailer manufacturer Cool
Nick
Logged
You can never have too many!
Port Macquarie NSW
zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1862


Old Boonah Ambo


View Profile
« Reply #5 on: June 03, 2010, 04:55:58 PM »
0
It's not uncommon for these to be a little too long on the head & or the thread, just cut them to suit
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 20 queries.