FE Bonnet Emblem

[Ken's 57]

Hi Everyone

Can anyone tell me what the story is with the two outer studs that hold the chrome bonnet emblem assembly in place please? According to the workshop manual there are just two nuts and these are easy to get at with the bonnet up. I've undone these but it has no intention of coming off just yet. There are still two studs/bolts on the outer part of each of the "wings" and before I go getting too rough with it, it would be nice to know what I'm dealing with here. They're not real accessible on the inside of the bonnet so what secures them? Nuts, clips or none of the above? 

Cheers.....Ken

[zulu]

Hi Ken, if you are talking FE Bonnet Emblem that has the round badge in the centre, the 2 inner studs are held in by speednuts, like a tin nut with washer all in 1

I think the outers are just studs that sit in the holes, can't remember 

Gary

[Ken's 57]

It's the outers that have me stumped Gary. I'm not sure if they are press fit studs that will just allow me to prise the chrome piece off or if they are held in place by nuts or clips. I've removed the two centre tin nuts that you've mentioned but it is still pretty well fixed to the bonnet.

[mcl1959]

No clips on the outers, my guess is that the threads on the bolts are just jammed in the holes in the bonnets - try giving them a little tap from behind.

Ken

[graham_fuller]

Hi Ken,
In the car I am doing up at the moment there were push in clips like the ones that hold in the glove box badge, but larger.My blue car dosen't have them and from what Ken has said maybe it never did.As Ken has said just lightly tap the studs and it should come free.
Cheers,
Graham

[Ken's 57]

Thanks Ken & Graham. The two studs were indeed jammed in there with 52 years worth of gunk. No amount of tapping would free them so I locked a couple of nuts onto the studs where they protrude through to the inside of the bonnet and withdrew the studs from the chrome piece. This did the trick. My main worry was always the thought of cracking the unit itself and then trying to find a decent replacement. Not an easy task.   

Cheers......Ken