FE-FC Holden Discussion Forum
November 23, 2024, 09:05:23 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > General Technical (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > GREY MOTOR ROLLER ROCKERS-DONE!
Pages: 1 [2]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: GREY MOTOR ROLLER ROCKERS-DONE!  (Read 25809 times)
Gman
Junior Member
**
Offline Offline

Model: FE
Posts: 96



View Profile
« Reply #20 on: February 13, 2015, 01:14:55 PM »
0
They are to stop the followers from rotating, they can't rotate because if they did the roller would tear the cam to pieces. The roller must stay inline with the cam lobe - hence the connecting plates on the lifters/followers Smiley
Logged
fe350chev
Guru
*****
Offline Offline

Model: FE and FC
Posts: 2601



View Profile
Re:
« Reply #21 on: February 13, 2015, 03:23:11 PM »
0
Pushrods not turning: http://youtu.be/ucgTw97UWQg
Logged
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck
fe350chev
Guru
*****
Offline Offline

Model: FE and FC
Posts: 2601



View Profile
Re:
« Reply #22 on: February 13, 2015, 03:31:19 PM »
0
The rate at which the rocker will stroke is approximately 33 strokes a second at 4000 rpm.  Any engine does a remarkable job hanging together, as long as they already do in my opinion. I've been watching with much interest.
Logged
Deano

Current Rides: 1958 "Black and White Taxi" FC special Sedan, 1957 FE special Sedan, BA Futura,  2015 VF Commodore, 1956 Austin Tipper Truck
Professor Grey
Junior Member
**
Offline Offline

Model: FC
Posts: 98



View Profile
« Reply #23 on: February 14, 2015, 05:08:09 PM »
0
Quote from: Gman on February 13, 2015, 01:14:55 PM
They are to stop the followers from rotating, they can't rotate because if they did the roller would tear the cam to pieces. The roller must stay inline with the cam lobe - hence the connecting plates on the lifters/followers Smiley

Of course! I hadn't seen that before, but I should have been able to work it out.
See, you CAN teach an old dog new tricks (apparently).

Thanks,
Prof.
Logged
You don't get this old by accident.
Pages: 1 [2]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.031 seconds with 19 queries.