FE-FC Holden Discussion Forum
November 25, 2024, 08:00:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Petrol Breather Pipe  (Read 1804 times)
Shane 05
Newbie
*
Offline Offline

Model: FC
Posts: 6


View Profile
« on: January 27, 2013, 06:53:24 AM »
0

Hi, just bought the fc from victoria.  We have very strong petrol smell particularly in the boot & its extremely hard to put fuel in the tank, keeps clicking off & only takes a small amount at a time.  There is no apparent leak.  Does anyone know whether it has a breather pipe & could it be blocked & where is it ? Cheers Shane
Logged
FCRB26
Guru
*****
Offline Offline

Model: FE and FC
Posts: 3802


peter.mallaby
View Profile
« Reply #1 on: January 27, 2013, 07:09:24 AM »
0

No breather mate it breaths thru the cap.

could be leaking through the sender unit might need a new gasket or the sender may have rusted out ?

In the boot you will see the wires going under a round cover with a slot pry this cap out and see whats going on.

I have never had a drama with it clicking when filling but i hold the bowser nozzle sideways ..

Check around top of tank for seepage it may have rusted as well.
May be worthwile removing it and give it a clean up only takes 20 min to remove.

Good luck \\\Pete
Logged

Shane 05
Newbie
*
Offline Offline

Model: FC
Posts: 6


View Profile
« Reply #2 on: January 27, 2013, 07:44:34 AM »
0

Thanks Pete for the advice, will give it a try!
Logged
DN2168
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 865


See you on the road Skag!!


dean.nommensen
View Profile WWW
« Reply #3 on: January 27, 2013, 09:08:52 AM »
0

Hi Shane,

I had the same smell in my FC, mostly just after it had been filled right up. I removed the sender & cut a gasket out of gasket paper the coated it with aviation gasket sealer both sides & haven't had a problem since. Lke Pete said yuo will have to work out the right angle of the dangle for filling your car up, I work at a servo & new cars are not much better.

Dean.
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.045 seconds with 20 queries.