separating bumpers

[GMHwagoon]

     I need to separate my bumper bar one section has rust
     what is the best way to do this, l can see the rivets have been spread at the ends
     do l need to grind these off
     do you replace these rivets or just go for a nut and bolt
     will the nut and bolt hold alright

      thanks greg 

[zulu]

Hi Greg, At least it's a good sign that you still have your original bumper bar/s = no major prangs.

I've always drilled mine out, you will need a nice sharp drill bit, about 5/16 ? or maybe a little smaller in case you miss the centre of the rivet, then replace with nuts & bolts.

Gary

[GMHwagoon]

  thanks gary
 that seemed like the best way to me
   greg