News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

HR Front END HQ

Started by hrpremier, October 15, 2009, 11:55:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

hrpremier

October 15, 2009, 11:55:35 PM
Hi Forum

I have a HR Front end I am installing into my FC Sedan for a V6 Conversion.  Have been told to get HQ rotors and hubs.  I have them lined up, but do I also need the HQ upper and lower contol arms to complete this setup or do they fit along with the HQ Knuckle between the HR control arms?
Thanks in advance.

Jase
I Have A Fever ............... And The Only Prescription ............... Is More Cowbell

http://gallery.oldholden.com/hrpremier/

FC427

#1
October 16, 2009, 09:07:57 AM
HQ to WB stubs will fit between your HR balljoints .... NO other controll arms will fit the HD HR front end ....FC427.......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

fcv85l

#2
October 20, 2009, 08:55:14 PM
and hktg

EffCee

#3
October 20, 2009, 09:32:56 PM
Quote from: fcv85l on October 20, 2009, 08:55:14 PM
and hktg

HK-T-G Stubs will fit, but not the control arms

Only HD-HR control arms will fit, Jase asked the question if HQ control arms will fit, these won't, nor will HK-T-G control arms.

Keith
Canberra, ACT

F4+ ;)

ratbox

#4
October 21, 2009, 04:41:11 PM
don't exactly know what the deal was but i bought a FC once that had a HR disc front and it had H/TG top arms on it
Print
Go Up Pages1
User actions