FE-FC Holden Discussion Forum
April 29, 2024, 11:32:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Restoration Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Seat Belts Again
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Seat Belts Again  (Read 1416 times)
KFH
qld-club
Senior Member
****
Offline Offline

Model: FC
Posts: 681



View Profile
« on: July 18, 2010, 06:25:22 PM »
0
I am considering putting recoil belts in the front of the car.  I am thinking of cutting an opening on the inside of the bottom of the B pillar and mounting the bottom plate there and also feeding a plate up to the top section.  This will let me get away with one opening.  What I wish to know is it possible to get a 3" x 2" x 3mm plate with a 7/16" nut welded on the back of it threaded past the metal work that supports the rear door hold open spring.  Has anybody done this?

Keith
Logged
I was born with nothing and still have most of it left
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.03 seconds with 19 queries.