FE-FC Holden Discussion Forum
November 17, 2024, 02:53:14 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Trans Cooler  (Read 2325 times)
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« on: November 27, 2009, 07:02:31 PM »
0

I am running a trans cooler that is mounted front and centre of the radiator, would it be beneficial to space the trans cooler away from the radiator or doesn't it make much difference?
I have had recent problems in warmer weather taking the car through city traffic and have been advised that the radiator is big enough but air flow may be an issue.
Logged

EffCee
Guru
*****
Offline Offline

Posts: 1359


F4+


View Profile
« Reply #1 on: November 27, 2009, 07:12:08 PM »
0

Glenn,

Using the transmission cooler directly against the radiator can do two things, in time the movement against the fins will lead to the radiator fins developing wear marks against the radiator and cracks in the cooling tubes will develop. The second is that it creates a hot spot and actually serves to heat the coolant that flows down the tubes where the oil cooler is mounted.

It is far better to leave approximately 10mm between the two and use a soft rubber insulator to ensure that there is no chance of any rubbing and that there is no direct convection heat from the cooler to the radiator.

Better still if you can find somewhere where it can get full airflow and not be anywhere in front of the radiator. This is the best scenario of all, however this is the most difficult to achieve

Keith
Logged

Canberra, ACT

F4+ Wink
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #2 on: November 27, 2009, 07:33:58 PM »
0

Thanks Keith, the trans cooler is mounted in an angle iron bracket that keeps it away from the radiator, but only by 5mms or so, no rubbing but I guess I am getting a hot spot  Undecided
Logged

jack_fc
Senior Member
****
Offline Offline

Model: FC
Posts: 745


SouthWest Coast, Victoria


View Profile
« Reply #3 on: November 27, 2009, 08:49:48 PM »
0



Glenn, mine's mounted underneath the car; under drivers seat. No probs so far.
cheers, jack
ps   havent seen that Gal yet, but I now know who owns it; also found out it runs a 351 on gas;
      so probably not your old one. More info tomorrow.
Logged

"when I was a young lout, it was all about sex, drugs, rock'n'roll, beer and hot Holdens. Now I'm an old lout, but I've still got the old Holdens and beer..."
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.036 seconds with 21 queries.