FE-FC Holden Discussion Forum
November 17, 2024, 08:43:02 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Modification Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > cable accelerator modification
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: cable accelerator modification  (Read 5571 times)
red_devil
nsw-club
Senior Member
****
Offline Offline

Posts: 635


I love YaBB 1G - SP1!


View Profile
« on: May 03, 2009, 09:16:11 PM »
0
Hi guys can anyone suggest the best method of using a cable instead of the original rod and linkage accelerator set up. The car is running a 179 with 186S carbie and inlet manifold.I believe I have to change the accelerator pedal as well?
Thanks
Red Devil
Logged
RET
Administrator
Guru
*****
Offline Offline

Model: FE
Posts: 5783



richard.e.thomas ret56fe
View Profile WWW
« Reply #1 on: May 13, 2009, 06:26:51 PM »
0
Rares used to sell a kit for this, don't know if they still do or not.

Otherwise, the pedal and brackets from a later model (ie early Commodore - blue/black motor) is probably your best bet. Others who've done this conversion more recently might have a better suggestion...

cheers
RET
Logged
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...
FC427
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 2457


I love YaBB 1G - SP1!


View Profile
« Reply #2 on: May 13, 2009, 07:32:23 PM »
0
Ken from ROBO"S spares  Blacktown also does a kit using the early Commodore components but works better if you use a later Commodore one and modify it pretty easy job I have done over 10 of these in all types of cars and all work well ......FC427......
Logged
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #3 on: May 13, 2009, 07:41:09 PM »
0
Apparently a Bits-are-shiti L300 cable is an easy conversion to the old pedal, I haven't tried it but intend to when I get a spare 10mins  Roll Eyes
Logged
StreetTrim - Motor Trimming
JB
qld-club
Guru
*****
Offline Offline

Model: FE
Posts: 1914



Jason Blanchard
View Profile
« Reply #4 on: May 13, 2009, 08:43:08 PM »
0
10 min... thats a quick conversion.  Shocked
Logged
Phone +64 223509263
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #5 on: May 13, 2009, 09:50:14 PM »
0
Quote from: fevanv6 on May 13, 2009, 08:43:08 PM
10 min... thats a quick conversion.  Shocked
That includes the 8 mins it takes me to call around the wreckers and find the cable  Tongue
Logged
StreetTrim - Motor Trimming
ownfc59
qld-club
Junior Member
**
Offline Offline

Posts: 67



View Profile
« Reply #6 on: December 02, 2009, 07:01:55 AM »
0
Hey Stinky,
Did you ever get that spare 10 minutes?
I am about to fit a twin carby set up to my FC & thought I would convert to cable at the same time.  Would be interested to know if the L300 pedal & cable was an easy changeover or whether I would be better off going with a late model commodore unit.
Cheers,
Pete
Logged
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #7 on: December 02, 2009, 07:19:37 AM »
0
Still haven't found that 10 mins  Roll Eyes, to clarify it's the L300 cable with the original FC Pedal
Logged
StreetTrim - Motor Trimming
pedro
qld-club
Guru
*****
Offline Offline

Model: FC
Posts: 1683


If you haven't grown up by 50, you don't have to.


View Profile
« Reply #8 on: December 03, 2009, 07:52:06 AM »
0
The commodore pedal mount is only spot welded to the floor, it's an easy job to drill out the welds and re weld it into another vehicle, the cable locater mounts on the firewall and is also just spot welded, if you didn't want to do any welding on the firewall it could be riveted in place, have a look at the pics of my wagon rebuild and you'll see what i mean.
                                 Pedro
Logged
I love animals - they taste great

F4+
red_devil
nsw-club
Senior Member
****
Offline Offline

Posts: 635


I love YaBB 1G - SP1!


View Profile
« Reply #9 on: December 03, 2009, 05:00:37 PM »
0
Thanks guy big help.
Red_Devil
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.037 seconds with 22 queries.