HR right upper suspension arm

[ratbox]

i'm after a HD/HR right hand upper suspension arm, balljoint etc not important

thanks

[FB_MAD]

There was mention on this forum a while back of a difference between HD and HR control arm length that had an effect on wheel alignment but not sure whether it referred to upper or lower control arms ( I think it was lower from memory ) or how correct the info was.I remember writing down the info on the differences at the time but can't bloody find it now.

Anyway,if you don't have any luck here,

 A mate of mine got a lower control arm from Classic Oz Wreck at Toronto NSW ph 02 49594546 or 02 49598999 a while back ( it wasn't cheap )  they might have what you need.

Maybe try also A and B Holden wreckers in QLD ph 07 3808 1678.I recently bought some parts from him and he seemed like a nice bloke to deal with and the price of the parts I bought wasn't too unreasonable.

Here's some other numbers for early Holden wreckers I got from Just Parts magazine.

Harrisons early spares 07 3801 1986
Auto wreckers Geelong 03 5278 8031
Holdent 03 9544 9155

Hope this is of some help.

[waynos]

akwell wreckers in nowra still have this stuff pretty cheap.pm me ,i can pick one up for ya and send it to ya,also i gotta see a guy soon that has  hr stuff

[ratbox]

i'll give akwell a call, wanted to steer clear of wreckers if possable you can usually buy a whole car for the price they want for a single part

[FB_MAD]

Yep dead right there Rat , I steer clear of wreckers and only use them as a last resort.My mate could have paid a bit more and got a complete HR front end compared to the price he had to pay for the HR lower control arm that he needed.

[earlyholdenfan]

Try Dave at Holbusters, he sold me some last week for $25 each
down side he is in Thomastown, Melborne, but will post them for you. ALternatively I can drop round and pick one up for you and post it
Matt

[waynos]

i always steer clear of wreckers too,i only posted it cause they are the most reasonable wrecker i know.
i went there recently and they wanted 30 bucks for a lower one

[FB_MAD]

 ::)That's five times less than my mate paid for one at a wreckers Waynos

I always try the various forums for wanted parts before I reluctantly start ringing the wreckers.Some wreckers prices are poisonous and some are reasonable like you said.

I've probably had about an 80% success rate via forums for wanted parts.

[ratbox]

have one on the way and 2 stainless side trims off an external coolaride sunvisor for the grand total cost of $9.60 postage gotta luv forums