FE-FC Holden Discussion Forum
July 07, 2024, 05:02:52 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: vacuum washers  (Read 1651 times)
rodliz
Newbie
*
Offline Offline

Posts: 9


View Profile
« on: February 01, 2008, 08:51:50 AM »
0

can anyone advise me on the hose connections for vac. washers on my fc i.e from control switch to washer bottle and vacuum source...cheers!
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: February 01, 2008, 06:47:29 PM »
0

Cut hose from fuel pump to wiper motor and insert a tee piece.
Connect hose from tee to inner pipe on switch.
Connect hose from outer leg of switch to top of vacuum jar.
Connect hose from lower outlet on vacuum jar to a tee under the dash.
Connect 2 short pieces of hose from this tee to the squirters. (Note the squirter hose diameter is smaller than the main hose diameter - the tee has one large leg and 2 small legs).

The instructions are clear that mixing the connections on the back of the switch will cause faulty operation.

Ken
Logged
rodliz
Newbie
*
Offline Offline

Posts: 9


View Profile
« Reply #2 on: February 02, 2008, 11:08:14 AM »
0

Thanks greatly Ken ---help appreciated!
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 19 queries.