News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Bosch Distributor in FC Grey motor

Started by FCman, July 02, 2009, 11:51:52 AM

Previous topic - Next topic

FCman

G/day all.

Can someone help me out with the Bosch part no for ignition points?

Thanks fcman
Sunshine FC

FE_UTE

If you can find them...grab them


Bosch   GB504

Cheers
Gary

Trevor_B

Hi,
Quick google search found these - quoted as Valiant but still GB504 (also known as S4), not to bad a price:
http://www.oztion.com.au/vshops/item.aspx?itemid=4873372&shopid=5701&tid=

Trevor_B
FC Sedan, Ute & Wagon .... only a Panel Van required to make the set

fastjbav6

Hi All,
GB504 contact points are no longer made by Bosch.
You can use GB529 which are the same except the terminal on the end of wire is a female type and not a horse shoe shape type. Just cut it off and solder the right terminal on and lengthen wire if necessary or modify the connection that goes through the distributor body to accept GB529's as they are. In my opinion at least you still have a good quality Bosch product.
You can buy them in Champion, part # S4V but in my opinion they do not last as long as the Bosch even with a new condenser fitted.
Regards
Seb
Yellow Knight
             

FCman

Yeah,thanks a lot guys,just been on to oztion,hope I can win a couple

fcman
Sunshine FC

weddo

Try this link to the Bosch catalogue

http://www.bosch.com.au/content/language1/downloads/Ignitioncatalogue07.pdf

Most Bursons outlets are listed as Bosch distributors

regards
Weddo