News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

clutch plate

Started by 59 me, July 01, 2009, 04:10:32 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

59 me

July 01, 2009, 04:10:32 PM
hi,was just hoping if anyone could help me with my new clutch install.My question is which way does the clutch plate go,hub to flywheel or hub to pressure plate,there is no indication printed on the plate and the manual says to flywheel,however the local transmission mechanic says to the pressure plate...thanks for reading mike

FC427

#1
July 01, 2009, 07:18:09 PM
IF you offer it to the flywheel hold it flat on the flywheel by hand  and turn it   it will only turn on one side the other side will bind on the springs one the flywheel .......FC427......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
Print
Go Up Pages1
User actions