News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

putting windscreen trim back on

Started by IFC.58, January 20, 2009, 12:04:05 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

IFC.58

January 20, 2009, 12:04:05 PM
can you please advise me on the best way to put the trim back in

do i put the screen in then it just slides back in the groove with a little lube
or do i have to put the moldings in the rubber and fit it all at once

thanks in advance
terry
hey my name is terry  i,m from brisbane
you,ll see me in my blue 58 fc wagon or
my other love a big red offroad baja vw
subaru powered and built to go anywhere
wave if you see me next time

FC427

#1
January 20, 2009, 01:05:17 PM
They need to be in the rubber before you fit it to the car take time to align the moulds in the rubber evenly before you pull the windscreen in ......FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

IFC.58

#2
January 20, 2009, 01:10:01 PM
thankyou

sounds like a pain of a job
i,m looking forward to it now heheheh
hey my name is terry  i,m from brisbane
you,ll see me in my blue 58 fc wagon or
my other love a big red offroad baja vw
subaru powered and built to go anywhere
wave if you see me next time
Print
Go Up Pages1
User actions