News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Metal seat surrounds

Started by freddyc, January 12, 2009, 06:12:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

freddyc

January 12, 2009, 06:12:11 PM
there is a set of metal seat surrounds on Ebay do the fit std FC sedan seats
Townsville North Queensland

RET

#1
January 12, 2009, 07:38:54 PM
They can be made to fit, but don't just bolt on. The locating screw holes etc on the FC seat aren't the same as FB/EK. This has been discussed before. Do a search for "seat surrounds" and see what turns up.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

mcl1959

#2
January 12, 2009, 09:20:15 PM
The other problem is that the back section is lower than FC and if fitted to a stock FC seat it will show a large patch of white material at the back which looks ugly.
OK if you are retrimming and change the pattern of the material to suit.

Ken
Print
Go Up Pages1
User actions