News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

red 6

Started by rod67, June 29, 2008, 08:54:20 PM

Previous topic - Next topic

rod67

hi just wondering do you have to run collapsable  steering  when putting 202 into fc in nsw

Spinner

The short answer - Yes.

The long answer, have a look at the modified vehicle guidelines on the RTA website.  I think that you'll find that by using the calculator, anything over 191 CID, in an FE or FC, is required to have a collapsible steering column.

Look here http://www.rta.nsw.gov.au/registration/downloads/vsi/vsi_dl1.html to some items of interest.  VSI 09 talks about wheels.  VSI 15 gives a list of engineers.  VSI 06 may contain the goodies.
VIB 58 talks about the new modified vehicle plate.  VIB 52 may allow an unregistered vehicle to be driven to a place for inspection or testing.

Cheers

Brett
(0414) 49-6706.  d5461 on Ebay.

rod67

just a silly question what steering column do use with HQ brakes and do i have to use rack and pinion

Ed

Rod,

At the risk of re-covering old ground.

Brake systems are independent of steering systems to a degree.  You can use HQ stub axles, or HQ brake adaptors on HR drum stub axles, in which case the steering arms are a straight bolt up arrangement.  Ken has clarified in previous posts which steering arms to use.

for your HQ set up you should be able to use std steering column, if you plan to stay under the +15% power upgrade, otherwise you may need a collapsible column.
You can get collapsible stock style columns fabbed up.

A rack and pinion steering is really only necessary to allow more room for fitment of larger engines such as V8's.  It is for physical space as it allows more room by eliminating the steering box.

While you could fit a R&P steering system, it isnt entirely necessary for the proper fitment and function of a red 6 and IMO you are better off with a well maintained drag link setup for cost and drivability.

Cheers

Ed



in the shed

rod67

just wondering where do you get the column from

Ed

Quote from: rod67 on June 30, 2008, 03:39:39 PM
just wondering where do you get the column from

I get the feeling we're doing all your home work Rod..

Besides surfing porn, you can use the internet for research!


in the shed

rod67

thank you for the advice i shore am going to miss the porn went to 186 instead ;D

Ed

Quote from: rod67 on June 30, 2008, 06:22:09 PM
thank you for the advice i shore am going to miss the porn went to 186 instead ;D
:D :D
in the shed