News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

standard FE steel wheels

Started by peterwmh, June 23, 2008, 11:51:07 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

peterwmh

June 23, 2008, 11:51:07 AM
Hi all.

I have a pair of FE Holden wheels date stamped 25/9/58 and 7/56.  Now these have the 5/8 valve hole which is larger than what is now considered standard.  Does this mean there is going to be problems fitting tyres to them?  Thanks Peter
Never late with a 308!!!!

FC427

#1
June 23, 2008, 12:15:53 PM
Peter they use to put a plastic sleeve in them from the inside should still be available ......FC427.....
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

peterwmh

#2
June 23, 2008, 12:37:31 PM
Good stuff, thanks for that.

Peter
Never late with a 308!!!!
Print
Go Up Pages1
User actions