News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Camper bench seat.

Started by FE_225, March 28, 2003, 01:36:04 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FE_225

March 28, 2003, 01:36:04 PM
Hi
Just wondering, with the layback/camper front bench seat for the FE/C, are these just a standard bench fitted with a hinge assy? Sorry if it sounds like a silly question, but I've never actually seen one.

Cheers
Tony
Worried about fuel economy?....Then buy a push bike!

Tony Galea

#1
March 28, 2003, 03:42:44 PM
Yes Tony you are on the ball. You can lay back the seat to any position you like.
           Cheers Tony G

Tony Galea

#2
March 28, 2003, 03:46:50 PM
Sorry Tony forgot to log on

mcl1959

#3
March 29, 2003, 09:56:33 AM
Tony, the lay back seat was not a factory option and was therefore always made from an original bench seat.
This involved removing the covers, cutting the frame, installing a hinge and release mechanism and then retrimming.  I have seen at least 5 different conversions so far - some a whole lot better than others.  The worst I have seen was a seat I just got which had pins you removed from under the seat and the back just falls down - no adjustment at all.

Ken
Print
Go Up Pages1
User actions