News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

petrol additive

Started by sjh291256, April 08, 2008, 05:49:40 PM

Previous topic - Next topic

sjh291256

I'm in the process of buying an FC (original) grey motor.  Could you please advise me of the additive that you use with unleaded petrol.  How much do you use?  And where do you purchase the additive from?

Regards,
Steve


FC427

Hi Steve there is a formula on the bottle mls of additive to litres of fuel . Are you buying a sedan Green and white ???? ......FC427........
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride

fastjbav6

I use FlashLube, 10 ml for every 10 litres of petrol. A little more for constant highway,performance, (make that spirited driving) or towing.

Seb
Yellow Knight
             

Rusty_T

 :)

Steve,

I use an additive called Valve Master and it can be bought from any Shell Garage. It has a scale on the bottle(which is a squeeze bottle) that tells you how much to add per litre of fuel.

Cheers Rusty

RET

Just wanted to add that the little bottles available at the service stations are perfect for measuring how much additive to put in the tank, but you don't want to keep buying the stuff in those.

Head down to Repco / Auto One / Supercheap etc, where you can get a litre of the stuff for under $20. That's a hell of a lot cheaper than $4 per 50ml bottle.

RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

NosFEratu

Hi Steve

I certainly don't want to say that any of the advice given so far is not good but my grey has now done around 25,000 miles using straight unleaded fuel and I haven't had any problems at all. 

Kathi  8)
NosFEratu