News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Valve Springs

Started by mudgee, March 03, 2008, 09:36:05 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mudgee

March 03, 2008, 09:36:05 AM
Hi Guys

The shop manual gives specs for valve springs as, free length 2.211 in approx.
Does this measurement include the spring cap ?

Cheers  George

sexyfc

#1
March 03, 2008, 12:56:45 PM
Na, that should be just the spring. What engine is this on?
Project started 16/01/08.

mudgee

#2
March 03, 2008, 05:09:04 PM
HI All

I,ts a grey motor I think the head is EJ. The springs with the caps on are the correct specs.

Thanks George

FC427

#3
March 03, 2008, 05:27:27 PM
 George you can always shim the springs to get the right installed height if they are to low ......FC427.......
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
Print
Go Up Pages1
User actions