Hydra-matic damper plate to flywheel bolts

[zulu]

G'day all, Just about to bolt the Hydra-matic damper plate to the flywheel, book says 13 -15 lb ft for the 6 bolts.

Just wondering if anyone on here has done this as I am not sure if I require lock washers under these bolts?

There is no evidence of lock washers having been used previously.

Ta, Gary

[Damo58]

G'day zulu you wont need any washes mate if you are a bit worried just put a little locktite on each bolt and they wont come undone

                                                 Cheers Damo58