News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

ebay Wiring Kit

Started by Glenn 'Stinky' Stankevicius, October 16, 2007, 11:41:35 PM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

Has anyone tried the wiring kit that is currently being sold on ebay? [ebay]270175028402[/ebay]
IIRC the kit I used for the sedan was about $400 from Airride, there were a lot of unused circuits though.

GMB-58FC

Quote from: stinky on October 16, 2007, 11:41:35 PM
Has anyone tried the wiring kit that is currently being sold on ebay? [ebay]270175028402[/ebay]
IIRC the kit I used for the sedan was about $400 from Airride, there were a lot of unused circuits though.

I've also been looking at these to finish off my FC.

From what i can tell they seem to be pretty good for the price but again they have extra circuits not needed (i was just going to cut them out) but i figure for $100 its worth a shot. 

I have already spent $50ish on what i have rewired so far and when i sat down and looked at cost price for material i couldn't do it for $100 so there is something to think about IMO.
ABS Hobart- 6231 5855

FOR ALL YOUR BRAKE & CLUTCH NEEDS. 

PM FOR QUOTE

FC427

I got one for my Hot Rod a few months back and what you get for $90 is not bad it was advertised for a Valiant the Holden ones were selling for about $140 at the time my one came from SA but there is a guy selling them in Western Sydney as well.   But it still needs a lot of wire to finish it of. It really only does under the dash and to the starter and coil  not a full rewire  but it is pretty simple to follow and with another $50 worth of wire I am just about there FC 427
As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride