News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FC Body Shell

Started by colt, June 24, 2007, 07:31:58 AM

Previous topic - Next topic

colt

Due to a change in direction, I have an FC body shell for sale. Details are: Body FC 225 33008S
                            Trim 277-847
                            Paint 253-0700
                            Insert 256-7770
Has been sandblasted & is in primer. Would suit a modified more than stock, it has no trans tunnel & has had quite a few rust repairs, with some minor repairs yet to do. I am open to offers around $150. I would consider cutting it up if someone wants bits. It has good sills & average quarters. The roof is good.
Colin, Canberra, 0401779510
colt

Chopd

Hi,

Do you have any photos of the shell? I have got a shell here, I've just had it blasted but needs  inner and outer sill repairs which may be too big a job for me. I would interested in a shell which doesnt need as much work.
What repairs does it need exactly?
Kind Regards'
Don Payne

colt

As it was to be used for a racer, any holes & minor rust has been patched rather than cut out. Would still require some decent work for a street car.
Colin
colt

minifcvan

Hi Colin, if you do decide to cut it up can you let me know...cheers mark

colt

Mark, any bits specifically?
Colin
colt