News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

heater hoses

Started by Phantom, May 26, 2007, 04:37:28 AM

Previous topic - Next topic

Phantom

G'day all, another dumb question , which heater hose do i put the heater tap on my red motor? the hose wich comes out of the top or the bottom of the engine?
                            Cheers Rusty
Bogans rule

RET

Neither.  Wouldn't that block all water into (or out of) the radiator? :o

The tap is usually fitted to the water pump.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

Phantom

I didnt explain myself i suppose , what heater hose do i put the tap ? i have two outlets from the water pump a top one and a bottom one , which hose do i put the tap on or doest it matter?
                    Rusty
Bogans rule

mcl1959

As far as I am aware there is only one heater hose outlet on a red motor water pump and it exits from the top just behind where the radiator hose attaches. On a new water pump it is usually blocked and you have to drill through to make it operational.  There are 2 outlets just above this in the thermostat housing which are for the manifold heater - are you getting confused with these two?

Ken