News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

Fuel tank repairs

Started by slim, January 24, 2003, 10:42:58 AM

Previous topic - Next topic

slim

Is there anybody who has had a fuel tank repaired in Sydney, as I have a ute fuel tank that needs repairs. Or do you just throw em away and find another one! AND where  :'(
Im located at Liverpool, NSW

brads59

Hi Slim,
            I took my fuel tank to a radiator repair specialist
and he braized it up a treat for me.
It was only $20 too ;D.
Not sure what repairs you need but hope this helps.
CHEERS   BRAD
1959 Black Std sedan

Effie C

Slim
If it is rust type repairs or such "POR" Industrial products make a fuel tank repair /treatment kit, as well as a lot of other things for repair / restoration. They are based in Sydney
Good Luck
John M
LIVE LIFE ONE DAY AT A TIME,FOR TOMORROW MAY NEVER COME!

Photo Site:http://img53.photobucket.com/albums/v161/EffieC/

Ed

Slim,

Ive used POR on motorcycle tanks and it works well,, you'd need alot of it for a car tank tho, and it could get pricey.

Id probably weld it up, and tip some POR fuel tank repair inside to seal up the porosity.

try www.ppc.au.com

i'm a fan of POR15 stuff, ive used it on the entire car inside and out.

good luck

Ed
in the shed

slim

The tank is to good to chuck out so Ill give POR a go,  like you suggested , Ill weld it , then POR it. Thanking you Gents .
Im located at Liverpool, NSW

mcl1959

Slim, I probably dont have to tell you - but for all others who read this - be BLOODY careful welding petrol tanks.
Best way is to flush thouroghly with water and leave some water in the bottom of the tank while welding.

Naturally the tank must be removed to do this.

NEVER EVER EVER attempt to weld up a petrol tank by  removing the plug in the bottom to drain the petrol and welding it in place in the car.

Ken

gree

there was a guy in my hometown once who thought he'd cut up an old 44 gallon drum that used to have fuel in it with an oxy.......

he survived, but i am pretty sure he'll never do that again
simon

slim

Might just pay someone else to repair it ;D
Im located at Liverpool, NSW