News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

accelerator cable

Started by morry, February 18, 2007, 01:34:10 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

morry

February 18, 2007, 01:34:10 AM
what accelerator cable do i use on an fc with a holden red 6 cyl with twin carbies.

Glenn 'Stinky' Stankevicius

#1
February 18, 2007, 07:33:54 AM
I think Rares have a conversion kit, many people here have made their own usually from Commodore setups. I have seen a conversion done with an L300(?) cable using the original accel pedal too.

fccool59

#2
February 18, 2007, 07:39:43 AM
if you are using a commodore pedal you might need a v8 commodore
cable for extra length.
rain sucks  http://www.youtube.com/watch?v=N1Ujma1lBac    rain sucks     rain sucks

NES304

#3
February 21, 2007, 11:26:59 PM
rares have one that was a b**** to work out as the description was not very clear but i'll have some pics up soon.


NES304

#4
February 27, 2007, 10:12:49 AM Last Edit: February 27, 2007, 10:16:07 AM by nes138
new accellerator cable was installed and you can see here the cable is mounted via a bracket on the base of the carby, the cable pulls the brass lever which is attatched to the front side of the carby butterfly shaft. The cable runs through the bottom hinge bolt in the last photo
Print
Go Up Pages1
User actions