News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

BACK PARCEL SHELF VINYL

Started by minifcvan, October 23, 2006, 01:23:46 AM

Previous topic - Next topic

minifcvan

hi all on our new fc the parcel shelf vinyl has lifted.i can restrech it with a hair dryer but what sort of glue will i use to reglue it?? cheers mark


Glenn 'Stinky' Stankevicius

I use contact adhesive for all my trim work, you can get it from Motor Trimmer Suppliers, Craft shops, my local Rares even has it in spray can form.
Just apply some to both (clean) surfaces, wait for it to tack off then press the two together.

Phantom

Hey Mini , i went to a trimmer and he made me a new parcel shelf and trimmed it for $40 cheap
                             Cheers Rusty
Bogans rule

Philby

G'day Mark,

My parcel shelf was buggered when I got my FC as well.  I made a new one using the original one as a template, easy as!  About three hours of work plus shopping for materials.

The hardest thing for me, was to get the sheeting (1 ply) the right width and curve so it sat nicely and the back seat went on its hook.

If you want any info, just send me a PM.

Cheers,

Phil

Brad

Mark
     I did the one on my FB with some M.D.F. 3 mill and some new vinyl from the local trimmers, almost a perfect match. It didn't take long and was pretty easy. Cost about $20.oo and looked like new  ;).
              Brad.
Id rather have a full bottle in front of me than a full frontal labotomy