News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE wagon rear window

Started by Rabbitoh, March 30, 2006, 10:23:53 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Rabbitoh

March 30, 2006, 10:23:53 PM
TRYING TO INSTALL NEW TAILGATE WINDOW SEAL IN FE WAGON.
CAN'T GET SEAL TO SIT RIGHT. DOES IT PULL ON FROM OUTSIDE OR INSIDE
Fortius Quo Fidelius 1966; Saints' 2nd in 2027?
Bunnies' 22nd in 2027?

JB

#1
March 31, 2006, 04:10:47 AM
I did mine from the inside. It was difficult and a tight fit with the new rubber. I put the new rubber aroung the screen first, then pushed the window to the lip and pulled the rubber over the lip using a rope about 6-7 mm thick. Not sure if it was the correct way, but it worked for me.

Cheers
Jason.
Phone +64 223509263

mcl1959

#2
March 31, 2006, 07:57:34 AM
Absolutely correct Jason.  Some rubber grease or other lubricant will also help in getting the rubber to slide into the opening.

Ken
Print
Go Up Pages1
User actions