News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

HR steering on HR crossmember

Started by NES304, February 26, 2006, 07:25:59 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

NES304

February 26, 2006, 07:25:59 AM
Any one know how the steering connects up from HR into FC???
Any photos??? I think I may be missing a part (pitman arm)
Does the FC steering links fit or are they short??


RET

#1
February 27, 2006, 11:41:07 PM
See point 5 of this excellent article on the topic.

cheers
RET
OurCarClub.com.au is a web-based data management application, custom built for car clubs and their volunteer officials. More info...

Effie C

#2
March 01, 2006, 08:38:17 PM
QuoteAny one know how the steering connects up from HR into FC???
Any photos??? I think I may be missing a part (pitman arm)
Does the FC steering links fit or are they short??


Nes
You will need the HR pitman arm, it fits in place of the FC one without any problems, the HR steering setup leaves the FC one for dead. Make sure your steering biox is up to shape and has no slop in it.
LIVE LIFE ONE DAY AT A TIME,FOR TOMORROW MAY NEVER COME!

Photo Site:http://img53.photobucket.com/albums/v161/EffieC/

NES304

#3
March 03, 2006, 12:16:55 AM
yeah i found that missing a pitman arm doesnt help but cheers for the info


Fast_Eddie

#4
March 03, 2006, 04:17:33 AM
You shall also need to reshape the sump slightly if you are running a grey motor.

NES304

#5
March 05, 2006, 11:06:58 AM
nope goin to run a black 202 efi to move the car around then hopefully in the future after the body rubbers and chrome are done then a V6


Print
Go Up Pages1
User actions