News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE/FC Ute Driver's Side Rear Bumperette

Started by Glenn 'Stinky' Stankevicius, February 07, 2006, 10:25:17 AM

Previous topic - Next topic

Glenn 'Stinky' Stankevicius

Like the subject says!
Must be reasonably straight, prefer good chrome and ready to bolt up. I will look at one that needs a rechrome if things get desperate.
Thanks

streetneat

Hey stinky
 Sort of a tall ask  you got there!- I have some bumperettes to suit re chrome. If you need some- give me a call on (07) 3206 0340/ 0412 032 239.
Cheers Andrew- streetneat
Cheers streetneat -Andrew

20.4_seconds

Glenn,
I have emailed you the pics  ;D

Don't get tooooo excited  ::) ::) ::) :P

Nick
All I  want for Christmas is a Smiths clock bracket and knurled knobs

20.4_seconds

#3
Glenn,
here ya go, maybe you could ask everyone in clubs to stay away from them  ::)...
Not in fantastic condition but the chrome looks pretty good.....

http://cgi.ebay.com.au/HOLDEN-FE-FC-FB-EK-UTE-PANEL-VAN-REAR-BUMPERETTES_W0QQitemZ4613354295QQcategoryZ32057QQrdZ1QQcmdZViewItem

still have to check that other one out for you  :P

Nick
All I  want for Christmas is a Smiths clock bracket and knurled knobs

REDMR2RED

The ones on ebay are pretty rough, they need straightening, welding alot of repairing and then re-chroming.

No reflection on the seller at all, he appears to be representing them fairly.

Kevin

1959 FC Holden Ute

Glenn 'Stinky' Stankevicius

#5
Those bloody rips on the bottom section have been on every one that I have seen. At least there is only the rip, mine are ripped and bent out of shape.
Thanks Nick, I'll keep an eye on these.
Hmmm, maybe I'll just save myself some trouble and weld up the spare door and put on a full bumper  ::)