News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

alternator/solenoid question

Started by Jonno, December 04, 2005, 07:30:55 AM

Previous topic - Next topic

Jonno

Hi,
Can anyone (ACE?) give me a pic of the modified bracket required to fit an alternator to a grey motor...there seems to be a protrusion from the block which sits in the way so I assume the bracket has to sit above this?

Also, among this mass of (presumably non-standard) wiring, does anyone recognise what the two boxes in addition to the regulator do? I am intending to pull all this out but am particularly worried by the little box since its connected to the starter solenoid...but doesn't appear in the wiring diagram:







thanks, Jonno
Cottles Bridge, VIC

ACE

Hi Jonno,
I've emailed you a pic of the alternator bracket, which is a modified red motor bracket.
The 2 extra boxes look like relays of some kind, maybe for driving light, air horns etc.
Regards ACE  8)

oldgmh

#2
my guess is that they are relays of some kind.  
Driving lights?  Air horns?
Most likely the car probably had voltage drop when starting at some stage in its life, so a relay would have been fitted to give the starter full power.  
But that only accounts for one relay which would be the bigger one.  
I am not sure about the little box.

Its a start anyway,
 ;D ;D
earlee.

Jonno

thanks guys for photo and advice....I will press on and see how I go.

cheers, Jonno :)
Cottles Bridge, VIC