News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

EH Holden steering wheel to FC?

Started by SRVLIVES, November 09, 2005, 09:05:18 PM

Previous topic - Next topic

SRVLIVES

Will an EH steering wheel fit a standard FC column?

colt

The spline should be the same, but I think the horn arrangement is different.
Colin.
colt

fccool59

3 slight problems, 1  the end of the eh colum is a smaller diametre than a fc one, there would be a bit of craft work involved.
and then 2, the EH steering wheel has a deeper dish wich will be more in your face on the long FC colum.
also 3, I think there is a difference in the indicator cancelling pins, probably not to hard to sort out but.

A easier alternative may be a eh colum.
rain sucks  http://www.youtube.com/watch?v=N1Ujma1lBac    rain sucks     rain sucks

SRVLIVES

Thanks for the info guys, was just comtemplating making a custom 60's style metalflake wheel.

Sarge

Both your horn & indicator return are different.

Cheers
Sarge
Mark Lees Tallerbudgera Queensland
       0421 165 351
Holden Classics; a BREED above the rest

fccool59

Ive seen metal flake wheels and they look good, I am going back to two tone but on a EH wheel with a EH colum, I was going to do it with a EK colum but it looked like to much hassle to adapt the wheel to the colum.
rain sucks  http://www.youtube.com/watch?v=N1Ujma1lBac    rain sucks     rain sucks