News:

Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.

Main Menu

FE wagon rear compartment

Started by Rabbitoh, October 19, 2005, 10:22:04 PM

Previous topic - Next topic

Rabbitoh

To anyone with a stock FE wagon:
I need some photos of the rear compartment interior (& tailgate) showing the various trims/linings etc. for a guide to what I should be aiming for.
Thanks.
Fortius Quo Fidelius 1966; Saints' 2nd in 2027?
Bunnies' 22nd in 2027?

mcl1959

Chris, the side panels are made of the same material that the front kickpanels are made from - painted in the same colour.  These are screwed on with the same screws and washers which hold the plastic surrounds on the front seat.
The floor area, back of the rear seat and tailgate is trimmed in a grey square pattern material with a hessian back.  It is a very heavy duty material.
The rear seat and tailgate have a metal trim which runs around the perimeter of them and is held in place by screws.
The rear floor material is glued in place.
Ken

Rabbitoh

Thanks Ken,
That is a very helpful guide for me to aim for. Got most of the metal trims you mention, but the hession backed fabric is not great in some areas.
Don't suppose any of that grey square pattern material is available these days?
Fortius Quo Fidelius 1966; Saints' 2nd in 2027?
Bunnies' 22nd in 2027?

20.4_seconds

Chris,
I have been watching this post also and taking all the advice on board, would you believe I saw one of those hessian backed rear covers on Ebay about 7 months ago and I didn't have a brass razoo to buy it  ::) ::)...it sold for $90.00 or abit over and it was in good condition too...something tells me that they are going to be rarer than rocking horse poo to find in good condition..
It was for an FE Wagon also...hmmm not too many of them around..wonder if they will read this post!!!

Nick  ;)

Now if we can get a few pics of a finished stock FE wagon to guide us that would please two of us  ;D


All I  want for Christmas is a Smiths clock bracket and knurled knobs

craiga

#4
Here's a couple of cars, but no shots of the rear compartment. Mick in QLD has a beautiful FE Standard wagon, somoene may have a shot of this. Maybe Alex?



Owned by Robin from the SA Club.



Owned by John Wanner from the VIC Club.



Owned by Michael Koetsier from the QLD Club.

20.4_seconds

Thanks Craig,
I had seen the bottom two before but not Robin's  :o
Anyone know if he is around the board much? I would love to see a few more close up photos of that one...it's soooo like mine  ;D

Sorry Chris dont mean to hijack

Nick
All I  want for Christmas is a Smiths clock bracket and knurled knobs

Hewart

Hey guys...
I had a couple of shots of Mick's FE in my Nationals album, only 1 good-ish one of the back compartment though... But in saying that, the back compartments of an FE Standard could be different to an FE Special as they are in the FC wagons (as indicated in this post http://www.fefcholden.org.au/cgi-bin/yabb/YaBB.cgi?board=pwntd;action=display;num=1129378045 )... not sure, but here they are anyway...





Hope that helps... rather than confused the issue more ;)
Cheers
Les....  ;)

craiga

#7
Good on ya Les.

The compartment looks identical to the one in my FC Special wagon, but maybe the boards on the side are slightly different composition? I know that the tray material is exactly the same because I had a very good look at Mick's car at Jindabyne.

Here's my wagon's compartment.



Cheers,

Craig.

customFC

Will a pic of a brand new wagon at the launch do you?

Regards
Alex

Rabbitoh

That's great Gents.
Thanks for sharing.
A picture really is wor..... well you know the cliche.
Fortius Quo Fidelius 1966; Saints' 2nd in 2027?
Bunnies' 22nd in 2027?

customFC

Here's another angle of Mick's interior in his standard wagon.

Regards
Alex