FATBOYS PANELVAN

[TorqueFC]

[TorqueFC]

[TorqueFC]

[TorqueFC]

[TorqueFC]

[TorqueFC]

[FATBOY]

some progress was made on tuesday night with the rear chassis tied together with 100x50x2mm gal  as seen in the pics car will be back on the spit on saturday so i can finish th chassis extensions on the passenger side

cheers fat

[Ed]

Looking nice fatboy,

you're a fast worker!

Cheers

Ed

[TorqueFC]

[TorqueFC]

[TorqueFC]

[TorqueFC]

[FATBOY]

a little sick of doing chassis work time to rebuild passenger side dogleg its got about 10 mm of bog in it and a few rust holes . i thinki might have to cut the end of one of my nos sill panels to repair it unless anybody has that section left over from another repair

cheers fatboy

[NO NAME]

I got the shits with mine, its a little more cancerous but not heeps more, I started cutting bits of then thought stuff it and cut the dog leg and sill end rite off.
its a tricky spot to work, especailly without a rottiserie.
hopefully I will be able to reconstruct it using the old chunk for a guide.
I have decided to open the rear of my tunnel up a bit were the tailshaft has been rubbing.
Looks like Either you are quick or I am slow, maybe you will beat me to the road.
Is there any chance you could put up a pic of the front of the inner sill if you have modified it, I have already done this I was just wondering what you were doing there if you were changing the area from standard.

[FATBOY]

the front a pillar wont look like standard but will do for this as for mine being on the road sooner then yours i dont think so i just ordered my suicide hinge kit for the front doors theres a another months of tuesdays of work
i havent started the front a pillar repairs yet will ge starting them when ive got the chassis finished this will hopefully be this tuesday. then ive got to grind all the welds on the wheel tubs and chassis extensions this will take a couple off days i think, not looking forward to this part of the project. if you have a look back through the photos you will see ive all ready done one dogleg repairand modified the inner wheel arch so that no dirt can lodge itself in there anymore

cheers fatboy

[TorqueFC]

[TorqueFC]

[TorqueFC]

[customFC]

Looks like work is progressing.
Torque....can you stop posting them pics backwards.....I hate seeing all that cancerous metal getting put back in.  ;D ;D
Regards
Alex

[FATBOY]

i ended up making the patch panels instead off cutting up my nos sill turned out pretty good atleast it wont have much bog in it in some places it had 10 mm of bog

cheers fat